Vehicle specification needs to be written with CONSULT because it is not written after replacing the air bag diagnosis sensor unit.
CONSULT connects to network and then it downloads the configuration data from the server. Then CONSULT writes the vehicle specification to the air bag diagnosis sensor unit. Refer to Work Procedure.
NOTE:
For details the operation, refer to “CONSULT Operation Manual”.
Work Procedure
Work ProcedurePreparation for Service Panel Installation
After removing the damaged panel, two operations are needed. Preparation for service panel installation and finishing of the panel mounting portion of the body.
(1) FINISHING BODY
(a) Grind clean around the area where the spot-welded panel has been removed. Thoroughly remove rust and other contamina ...
Removal and Installation
WARNING:
REMOVAL
Remove transfer assembly from vehicle. Refer to Removal and Installation.
Remove input oil seal.
CAUTION:
Never damage the front case and input shaft.
INSTALLATION
Note the following, and install in the reverse order of removal.
Install input oil seal with a drift (A) (commercial s ...
Maintenance precautions
When performing inspection or maintenance tasks on your Nissan Armada, always
take appropriate precautions to prevent injury and avoid damaging the vehicle.
The following safety guidelines should always be observed when working on your
Nissan Armada:
WARNING
Park the Nissan Armada on a lev ...