Nissan Armada 2025-2026 Service and Repair Manual: Inspection
INSPECTION AFTER REMOVAL
Examine with eyes that there is no stain, clogging, or damage on air cleaner filter.
Remove dusts (such as dead leafs) on air cleaner filter surface and inside cleaner case.
To clean air cleaner element, blow it from intake manifold side towards air intake side to remove trash or dust.
If clogging or damage is observed, replace the air cleaner filter.
MAINTENANCE INTERVAL
Refer to Periodic Maintenance.
Removal & Installation
REMOVAL
NOTE:
The mass airflow sensor can be removed while still installed on the air cleaner cover.
Pinch the clip on the air cleaner cover to release the lock, and remove the air cleaner cover.
...
Drive Belt
...
Other materials:
Work Procedure
Perform action test to verify the customer's concern.
Perform action test and check the system operation after system diagnosis.
NOTE:
Perform the Intelligent Blind Spot Intervention system action test after checking that the I-LI system operates normally because the Intelligent Blind Spot Interven ...
Work Procedure
When the following parts are replaced or removed, be sure to perform the specified incidental work in order to operate the system normally.
NOTE:
Since HD map module starts updating the map data from a position close to the own vehicle after replacement, it is not necessary to wait for completion of ...
Removal and Installation
CAUTION:
Never damage the body panel.
REMOVAL
CAUTION:
Remove luggage side lower finisher. Refer to Removal and Installation.
Apply protective tape (A) on rear pillar finisher to protect it from damage.
Disengage seat belt finisher fixing pawls using a remover tool (A).
: Pawl
Apply protectiv ...
0.0053