NIARMADA Nissan Armada manuals & owner information
Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada manuals, operating instructions, maintenance references and technical information.

Browse manuals →
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: Diagnosis and Repair Work Flow

Nissan Armada 2025-2026 Service and Repair Manual / Brakes / Brake Control System. Automatic Emergency Braking / Diagnosis and Repair Work Flow

Work Flow

OVERALL SEQUENCE

DETAILED FLOW

INTERVIEW FOR MALFUNCTION

It is also important to clarify the customer concerns before starting the inspection. Interview the customer about the concerns carefully and understand the symptoms fully.

NOTE:

The customers are not professionals. Never assume that “maybe the customer means···” or “maybe the customer mentioned this symptom”.

>>

GO TO 2.

SELF-DIAGNOSIS WITH CONSULT

  1. Perform “All DTC Reading” with CONSULT.

  2. Check if the DTC is detected on the self-diagnosis results of following.

    • “ICC/ADAS 2”

    • “LASER/RADAR”

    • “LANE CAMERA”

Is any DTC detected?

YES>>

Record or print self-diagnosis results and freeze frame data (FFD).GO TO 5.

NO>>

GO TO 3.

ACTION TEST

Perform Following system action test to check the operation status. Refer to Work Procedure.

Check if any other malfunctions occur.

>>

GO TO 4.

SYMPTOM DIAGNOSIS

Perform the applicable diagnosis according to the diagnosis chart by symptom. Refer to Symptom Table.

>>

GO TO 6.

TROUBLE DIAGNOSIS BY DTC

  1. Erase self-diagnostic results.

  2. Ignition switch OFF → ON.

    CAUTION:

    Be sure to wait of 10 seconds after turning ignition switch OFF or ON.

  3. Check the DTC in the self-diagnosis results.

  4. Perform trouble diagnosis for the detected DTC following.

    • “ICC/ADAS 2”(Without ProPILOT Assist 2.1): Refer to DTC Index.

    • “ICC/ADAS 2”(With ProPILOT Assist 2.1): Refer to DTC Index.

    • “LASER/RADAR”: Refer to DTC Index

    • “LANE CAMERA”: Refer to DTC Index.

NOTE:

If Network-DTC is detected, first diagnose the CAN communication system.

>>

GO TO 6.

MALFUNCTIONING PART REPAIR

Repair or replace the identified malfunctioning parts.

>>

GO TO 7.

REPAIR CHECK (SELF-DIAGNOSIS WITH CONSULT)

  1. Erases self-diagnosis results.

  2. Perform “All DTC Reading” again after repairing or replacing the specific items.

  3. Check if any DTC is detected in self-diagnosis results of following.

    • “ICC/ADAS 2”

    • “LASER/RADAR”

    • “LANE CAMERA”

Is any DTC detected?

YES>>

GO TO 5.

NO>>

GO TO 8.

REPAIR CHECK (ACTION TEST)

Perform the action test. Check that the malfunction symptom is solved or no other symptoms occur. Refer to Work Procedure.

Is there a malfunction symptom?

YES>>

GO TO 4.

NO>>

INSPECTION END

    Other materials

    Transfer Assembly
    Exploded View Transfer assembly : N·m (kg-m, ft-lb) Removal and Installation WARNING: Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Li ...

    System Setting
    Description The settings of the automatic driving positioner system can be changed, using information display in the combination meter and the set switch. Always check the settings before and after replacing driver seat control unit. For details, refer to Work Procedure.×: Applicable Setting Change ...

    The Steering Switches Are Inoperative
    Diagnosis Procedure If any of the following malfunctions is found for the steering switch operation. All switches are inoperative The specified switch cannot be operated CHECK STEERING SWITCH SIGNAL CIRCUIT Check the steering switch signal circuit. Refer to Component Function Check. Is the inspe ...