Nissan Armada 2025-2026 Service and Repair Manual: Diagnosis and Repair Work Flow

Inspection

WARNING: INSPECTION Uneven wear Check the uneven wear of the disc rotor using a micrometer. Replace the disc rotor if the thickness is below the wear limit. Refer to Removal and Installation. Thickn ...

Work Flow

DETAILS OF TROUBLE DIAGNOSIS FLOWCHART COLLECT THE INFORMATION FROM THE CUSTOMER It is also important to clarify customer concerns before starting the inspection. First of all, perform an interview ut ...

Other materials:

Service
Never use electrical test equipment to check SRS circuits unless instructed to in this Service Manual. Before servicing the SRS, ignition switch OFF, disconnect battery negative terminal and wait 3 minutes or more. For approximately 3 minutes after the cables are removed, it is still possible for th ...

Inspection
INSPECTION AFTER REMOVAL Check dust boot clamp (looseness and disconnection) and dust boot (scratches, cracks, and holes). Replace the lower joint, as necessary. Check each part of lower joint for damage and other malfunctions. Replace if there is a malfunction. Check each part of steering shaft for ...

Inspection and Adjustment
INSPECTION BEFORE INSTALLATION Be sure to check dimension (A) to ensure it is within the reference value limit. B : Scale C : Straightedge Dimension (A) : Refer to Torque Converter. INSPECTION AFTER INSTALLATION Start the engine and check visually that there is no leakage of ATF. Check A/T ...