Nissan Armada 2025-2026 Service and Repair Manual: Diagnosis and Repair Work Flow

Heater & Air Conditioning Control System — Basic Inspection

...

Work Flow

OVERALL SEQUENCE DETAILED FLOW GET INFORMATION FOR SYMPTOM Check operation condition of the function that is malfunctioning. >> GO TO 2. CHECK DTC Check DTC. Perform the following procedure ...

Other materials:

Upper Dash
WARNING: Work after radiator core main support, side radiator core support, and hoodledge are removed. : Vehicle front : Weld the parts onto the back of the component part. Replacement part • Upper dash assembly • Cowl top assembly : Vehicle front : Weld the parts onto the back of the co ...

Removal and Installation
REMOVAL Remove front heater & cooling unit assembly and front blower unit assembly. Refer to Removal and Installation. Disconnect front mode door motor harness connector . Remove fixing screws , and then remove front mode door motor. INSTALLATION Install in the reverse order of removal. ...

Adjustment of Steering Angle Sensor Neutral Position
Always adjust the neutral position of steering angle sensor before driving when the following operation is performed. Refer to Work Procedure. ×: Required —: Not required Procedure Adjust the neutral position of steering angle sensor Removing/ installing ABS actuator and electric unit (control ...