Basic Inspection
Work FlowPrecautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
Foam Repair
During factory body assembly, foam insulators are installed in certain body panels and locations around the vehicle. Use the following procedure(s) to replace any factory-installed foam insulators.
URETHANE FOAM APPLICATIONS
Use commercially available Urethane foam for sealant (foam material) repair ...
Vehicle Speed at Which Gear Shifting Occurs
2WD
STANDARD MODE
Unit: km/h (MPH)
Gear position Throttle position Full throttle Half throttle D1 → D2 44 - 48 (27 - 30) 40 - 44 (25 - 27) D2 → D3 73 - 81 (45 - 50) 65 - 73 (40 - 45) D3 → D4 107 - 117 (66 - 73) 93 - 103 (58 - 64) D4 → D5 149 - 159 (93 - 99) 121 - 131 (75 - 81) ...