Work FlowRemoval and Installation
CAUTION:
REMOVAL
Remove headlining assembly. Refer to Removal and Installation.
Disconnect harness connector.
Disengage personal lamp bracket fixing pawls using a remover tool (A) according to numerical order 1→2 indicated by arrows as shown in the figure, and then remove personal lamp and persona ...
Twisting
This refers to deformation of side frame-to-crossmember joints due to rollover caused by a collision accident. The right and left frames/members are twisted in the axially opposite direction to each other. In the body alignment dimensions, the height values of the side frame measurement points locat ...
Removal and Installation
REMOVAL
Remove front door assembly. Refer to Removal and Installation.
Remove front door hinge mounting bolts, and then remove front door hinge.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
Before installation, check the front door hinge rotating ...