Display
Work FlowPeriodic Maintenance
The following tables show the normal maintenance schedule. Depending upon weather and atmospheric conditions, varying road surfaces, individual driving habits and vehicle usage, additional or more frequent maintenance may be required.
Periodic maintenance beyond the last period shown on the tables r ...
Adjustment
FITTING ADJUSTMENT
Fitting Adjustment Standard Dimension
Roof panel Rear combination lamp Rear bumper fascia Back door panel Back door striker TORX bolt Back door bumper rubber upper Back door hinge : Always replace after every disassembly. : N·m (kg-m, ft-lb) : Body grease
Unit: mm [ ...
Work Procedure (Group A)
*1: When the same malfunction is detected in two consecutive trips, MIL will illuminate.
CHECK DTC
Check DTC.
Is any DTC detected?
YES>>
Repair malfunction(s) and erase DTC.
NO>>
GO TO 2 .
CHECK PERMANENT DTC
With CONSULT
Ignition switch OFF and wait at least 10 seconds.
Ignitio ...