CHECK THIGH SUPPORT MECHANISM
Check for the following.
Mechanism deformation or pinched foreign materials.
Interference with other parts because of poor installation.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning parts.
CHECK THIGH SUPPORT SWITCH
Check thigh support switch LH. Refer to Component Function Check.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace the malfunctioning parts.
CHECK THIGH SUPPORT MOTOR
Check thigh support motor LH. Refer to Component Function Check.
Is the inspection result normal?
YES>>Check intermittent incident. Refer to Intermittent Incident.
NO>>Repair or replace the malfunctioning parts.
Thigh Support
Seat LiftingLower Dash
WARNING:
Work after radiator core main support, side radiator core support, hoodledge, and upper dash are removed.
: Vehicle front
: Welding method and the number of welding points apply to both sides of the vehicle. Replacement part • Lower dash complete • Lower side dash assembly
Adhe ...
Removal and Installation
REMOVAL
Remove front door outside molding. Refer to Removal and Installation.
Remove front door glass run of upper side. Refer to Removal and Installation.
Remove front door weather-strip of upper side. Refer to Removal and Installation.
Apply protective tapes (A) on the part to protect it from dama ...
How to Erase Pearmanent Dtc
WHEN A DTC IS STORED IN TCM
When a DTC is stored in TCM and MIL is ON, a permanent DTC is erased with MIL shutoff if the same malfunction is not detected after performing the driving pattern for MIL shutoff three times in a raw.
NOTE:
The following timing chart is for DTC of two trip detection diag ...