CHECK AUTO OPEN/CLOSE FUNCTION
Check auto open/close function using automatic back door switch.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Refer to Diagnosis Procedure.
CHECK BACK DOOR OPENER SWITCH
Check back door opener switch.
Refer to Component Function Check.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace the malfunctioning parts.
REPLACE AUTOMATIC BACK DOOR CONTROL UNIT
Replace automatic back door control unit. Refer to Removal and Installation.
Confirm the operation after replacement.
Is the result normal?
YES>>INSPECTION END
NO>>Check intermittent incident. Refer to Intermittent Incident .
Back Door Opener Switch
Hands Free SensorRemoval & Installation
CAUTION:
Before replacing audio amp, perform "ADDITIONAL SERVICE WHEN REPLACING audio AMP". Refer to Work Procedure.
REMOVAL
Remove luggage side lower finisher RH. Refer to Removal and Installation.
Remove the audio amp. mounting nut , and then remove the audio amp. .
Disconnect the audio amp. har ...
Construction of Spot Welder
The spot welding machine consists of a transformer unit which supplies the voltage and current required for welding, a timer unit which controls the current passing time, and a welding gun.
The separate transformer type includes a multi-functional type for welding of pins and washers.
...
Recycle Refrigerant
WARNING:
Always use HFO-1234yf for A/C refrigerant. If CFC-12 or HFC-134a is accidentally charged, A/C compressor is damaged due to insufficient lubrication.
Always observe and follow precautions described on refrigerant container and service manual. Incorrect handling may result in an explosion of ...