Diagnosis Procedure
All SwitchesWork Procedure
DESCRIPTION
When replacing the Combination meter, perform the procedures before and after replacement.
Before Replacement
Take note the odometer mileage of the combination meter. When replacing the combination meter, check that DTC’s are not detected at "self-diagnostic result" of ABS. When detect ...
Removal and Installation
REMOVAL
CAUTION:
Before removing, take a short memo/photo to remember door harness and cable layout.
Remove front door glass. Refer to Removal and Installation.
Disconnect harness connectors , and then disengage harnesses fixing clips.
: Clip
Remove hole seals from front door panel, and then r ...
Stroke Sensor Calibration
CAUTION:
Always perform stroke sensor calibration before driving after any of the following operations is performed.
×: Necessary, -: Not necessary
Procedure Stroke sensor calibration Removing/installing electrical brake control unit × Replacing electrical brake control unit × Removing/ins ...