CHECK FRONT POWER WINDOW MOTOR (PASSENGER SIDE) POWER SUPPLY AND GROUND CIRCUIT
Check front power window motor (passenger side) power supply and ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning parts.
CHECK LIN COMMUNICATION CIRCUIT
Check LIN communication circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>Replace front power window motor (passenger side). Refer to Disassembly and Assembly.
NO>>Repair or replace the malfunctioning parts.
Determining Panel Damage
CAUTION:
This repair method should not be used on rails and reinforcements.
Panel damage must be examined carefully to select the most suitable repair method.
(A) In the figure is the plastic deformed area and the surrounding portions are elastic deformed areas.
Correction of (A) will automatically ...
Change of System Mode
CAUTION:
When the following operations are performed, always use CONSULT, for performing "System mode change" of "Work support". Refer to Work Procedure.
×: Required —: not required
Procedure System mode change Removing/installing ABS actuator and electric unit (control unit) — Replacing ...
Removal and Installation
WARNING:
REMOVAL
Ignition coil
NOTE:
No. 2-No. 5 can be removed using only the ignition coil.
Remove engine cover. Refer to Removal and Installation.
Remove mounting bolt from air inlet tube 1 . (No. 1 and No. 6 cylinder)
: Vehicle front
Remove mounting bolt from air inlet tube 1 . (No. 1 and ...