CHECK INTELLIGENT REAR VIEW MIRROR POWER SUPPLY AND GROUND CIRCUIT
Check intelligent rear view mirror power supply and ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning parts.
CHECK AUTO ANTI-DAZZLING MIRROR CIRCUIT
Check auto anti-dazzling mirror circuit. Refer to Diagnosis Procedure.
Confirm the operation after replacement.
Is the inspection result normal?
YES>>INSPECTION END
NO>>GO TO 3.
REPLACE INTELLINGENT REAR VIEW MIRROR
Replace intelligent rear view mirror. Refer to Removal and Installation.
Is the inspection result normal?
YES>>INSPECTION END
NO>>Check intermittent incident. Refer to Intermittent Incident.
Work Procedure
After the front camera unit or distance sensor are replaced or a problem with ProPILOT Assist is corrected, perform a test of ProPILOT Assist 1.1 operation and check that ProPILOT Assist 1.1 operates correctly.
CAUTION:
Always drive safely when performing the action test.
CHECK FOR ProPILOT ASSIST S ...
Exploded View
Bracket Air tank Clip Protector Air connector Air tube To air suspension control module :Vehicle front : Always replace after every disassembly. :N·m (kg-m, ft-lb) :N·m (kg-m, in-lb) :Apply silicone sealant. ...
Removal & Installation
WARNING:
REMOVAL
Remove valve timing control covers (bank 1 and bank 2) and gasket as follows:Disconnect valve timing oil control solenoid valve (bank 1 and bank 2) harness connector. Loosen valve timing control cover mounting bolts in the order from 4 to 1 as shown in the figure.
: Bank 1 : Ba ...