REPLACE AUTO ANTI-DAZZLING INSIDE MIRROR
Replace auto anti-dazzling inside mirror. Refer to Removal and Installation.
Is the inspection result normal?
YES>>INSPECTION END
NO>>Check intermittent incident. Refer to Intermittent Incident.
Inner Center Pillar
WARNING:
Work after center pillar and outer sill are removed.
Unit: mm (in) : Vehicle front : Drill φ8 mm (0.31 in) hole for the plug welding hole (ultra high strength steel). Replacement part • Inner center pillar ...
Removal and Installation
REMOVAL
Remove luggage side lower finisher RH. Refer to Removal and Installation.
Disconnect rear mode door motor harness connector .
: Vehicle front
Remove fixing screws , and then remove rear mode door motor.
INSTALLATION
Install in the reverse order of removal. ...
Multiport Fuel Injection System or Engine Control System
Before connecting or disconnecting any harness connector for the multiport fuel injection system or ECM:
Turn ignition switch to “OFF” position.
Disconnect negative battery terminal.
Otherwise, there may be damage to ECM.
Before disconnecting pressurized fuel line from fuel pump to injectors, b ...