Nissan Armada 2025-2026 Service and Repair Manual: Inner Center Pillar

Outer Sill

WARNING: For easier installation, remove the "View A, B, C, D, E, F and U" weld point, bolt and nut. Remove the lower side dash assembly (reusable) from the vehicle for easier installation. Body sea ...

Inner Sill

WARNING: Work after lower side dash assembly, center pillar, outer sill, and inner center pillar are removed. Unit: mm (in) : Vehicle front : Drill φ7 mm (0.28 in) hole for the plug welding hole (u ...

Other materials:

Draining
WARNING: WARNING: To avoid being scalded, never change engine coolant when the engine is hot. Wrap a thick cloth around reservoir tank cap and carefully remove reservoir tank cap. First, turn reservoir tank cap a quarter of a turn to release built up pressure. Then turn reservoir tank cap all the wa ...

Work Procedure
Description When replacing or removing the Head Up Display unit, distortion calibration of the display and adjustment of the display position are required. Work Procedure REPLACE HEAD UP DISPLAY UNIT Replace Head Up Display unit. Refer to Removal and Installation. >> GO TO 2. PERFORM CALIBRA ...

Comparison of Pulling Methods
(1) HYDRAULIC RAM TYPE In this method, the pressing force of a hydraulic ram is converted to a pulling force by a chain. Pulling points on the body may be added easily, and there is more freedom to select the pulling direction. The pulling direction changes during pulling. Difficult to simultaneous ...