CHECK AUTO ANTI-DAZZLING MIRROR CIRCUIT
Check auto anti-dazzling mirror circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning parts.
REPLACE GLASS MIRROR
Replace glass mirror. Refer to Removal and Installation.
Confirm the operation after replacement.
Is the inspection result normal?
YES>>INSPECTION END
NO>>GO TO 3.
REPLACE INTELLIGENT REAR VIEW MIRROR
Replace intelligent rear view mirror. Refer to Removal and Installation.
Is the inspection result normal?
YES>>INSPECTION END
NO>>Check intermittent incident. Refer to Intermittent Incident.
Removal and Installation
REMOVAL
Remove luggage side lower finisher LH. Refer to Removal and Installation.
Disconnect automatic back door control unit harness connector.
Remove automatic back door control unit mounting nuts , and then remove automatic back door control unit .
INSTALLATION
Install in the reverse order of r ...
Removal and Installation
REMOVAL
Captain Seat
Remove inside seat cushion finisher outer. Refer to Disassembly and Assembly.
Disconnect seat belt buckle harness connector and disengage harness clips.
Remove seat belt buckle mounting anchor bolt, and then remove seat belt buckle.
Bench Seat
Remove the following part.
Seat cu ...
Steering Gear and Linkage
Item Standard
: Gear housing end
: Inner socket end Rack stroke neutral position (C) 27.5 mm (1.083 in) Rack stroke full stroke position (C) 154 mm (6.06 in) Outer socket ball joint Swing force* (Spring balance measurement) 14.0 – 40.6 N (1.43 – 4.14 kgf, 3.15 – 9.12 lbf) Ball joint ...