COMBINATION SWITCH INSPECTION
Check combination switch. Refer to Symptom Table.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning part.
CHECK FRONT FOG LIGHT REQUEST SIGNAL
With CONSULT
Select “Front fog lamp request” in “Data Monitor” mode of “IPDM E/R” using CONSULT.
With operating the front fog lamp switch, check the monitor status.
| Monitor item | Condition | Monitor status | |
|---|---|---|---|
| Front fog lamp request | Front fog lamp switch (With lighting switch 2ND) | ON | On |
| OFF | Off | ||
Is the item status normal?
YES>>Replace IPDM E/R. Refer to Removal and Installation.
NO>>Replace BCM. Refer to Removal and Installation.
Both Side Front Fog Lamps Are Not Turned onUltra High Strength Steel Part
DESCRIPTION
Ultra high strength steel parts signify high strength steel plates with tensile strength of 980 MPa or more.
When replacing parts made of ultra high strength steel or parts including ultra high strength steel, never perform the prohibition described below:
PROHIBITION
WARNING:
Never cut ...
How to Check Terminal
HARNESS REPAIR KIT
When making a harness repair, refer to Connector Repair and Parts Lookup.
HOW TO PROBE CONNECTORS
Connector damage and an intermittent connection can result from improperly probing of the connector during circuit checks.
The probe of a digital multimeter (DMM) may not correctly fi ...
Engine oil
Checking engine oil level
Vehicle set-up
To ensure accurate engine oil level readings in your Nissan Armada, follow the
proper preparation steps below.
1. Park the Nissan Armada on a flat, level surface and securely apply the parking
brake.
2. Start the engine and allow it to reach no ...