Nissan Armada 2025-2026 Service and Repair Manual: Diagnosis Procedure
CHECK HEAD UP DISPLAY BRIGHTNESS ADJUSTMENT SIGNAL
With CONSULT
Select "Display brightness" in "Data Monitor" mode of "Head Up Display” using CONSULT.
Check "Display brightness" indication as per the following condition.
Monitor item Condition Indication Display brightness Press brightness adjustment on the combination meter setting screen. The display changes from (-10) to (10) Refer to Switch Name and Function.
Is the inspection result normal?
YES>>Replace Head Up Display unit. Refer to Removal and Installation.
NO>>Check Combination meter self diagnosis result. Refer to DTC Index.
Other materials:
Hoodledge
WARNING:
Work after side radiator core support is removed.
Urethane foam Body sealing : Vehicle front
: Drill φ8 mm (0.31 in) hole for the plug welding hole (ultra high strength steel).
: Weld the parts onto the back of the component part.
: N•m (kg-m, ft-lb) Replacement part • Hoodledge ...
Removal and Installation
REMOVAL
Remove rear bumper fascia. Refer to Removal and Installation.
Disconnect automatic back door warning buzzer harness connector.
Remove automatic back door warning buzzer mounting nuts , and then remove automatic back door warning buzzer .
INSTALLATION
Install in the reverse order of removal ...
Removal and Installation
WARNING:
REMOVAL
Ignition switch OFF.
CAUTION:
Wait for 60 seconds after the ignition switch OFF.
Disconnect negative battery terminal. Refer to Removal and Installation.
Disconnect the transfer range position sensor connector.
Remove the transfer range position sensor.
INSTALLATION
Note the follow ...
0.007