Nissan Armada 2025-2026 Service and Repair Manual: Removal and Installation
WARNING:
REMOVAL
Ignition switch OFF.
CAUTION:
Wait for 60 seconds after the ignition switch OFF.
Disconnect negative battery terminal. Refer to Removal and Installation.
Disconnect the transfer range position sensor connector.
Remove the transfer range position sensor.
INSTALLATION
Note the following, and install in the reverse order of removal.
CAUTION:
Never damage the O-ring of position sensor.
Never contaminate or damage the O-ring mounting surface.
Exploded View
Transfer assembly Transfer range position sensor : N·m (kg-m, in-lb) ...
Inspection
INSPECTION AFTER INSTALLATION
Check fluid leakage and the fluid level. Refer to Inspection.
ADJUSTMENT AFTER INSTALLATION ...
Other materials:
Removal and Installation
REMOVAL
CAUTION:
When removing, always use a remover tool that is made of plastic.
Remove rear center tray cup holder mat and rear center pocket mat.
Remove rear center tray front mask.Apply protective tape (A) on the part to protect it from damage.
Disengage fixing pawls using a remover tool (A), ...
Precautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
ROAD WHEEL TIRE : Exploded View
Tire Air valve Wheel : For non-reusable parts, refer to the TPMS configuration diagram.
Refer to TIRE PRESSURE SENSOR : Exploded View. : N·m (kg-m, ft-lb) ...
0.007