CHECK THE LENS
Check that the surface of the lens is clean (No dust, No water mist, No damage, etc).
Is it clean?
YES>>GO TO 2.
NO>>Clean the lens with a cleaning cloth.
CHECK THE WINDSHIELD
Check that the windshield in front of the driving recorder is clean (No dust, No water mist, No damage, etc).
Is it clean?
YES>>GO TO 3.
NO>>Clean the windshield in front of the driving recorder.
RECONFIRM THE IMAGE
Check the image for the driving recorder again.
Is image still blurred?
YES>>Replace the driving video recorder control module. Refer to Removal and Installation.
NO>>INSPECTION END
Blurred ImageInspection Procedure
INSTRUMENT PANEL
Most incidents are caused by contact and movement between:
Cluster lid A and instrument panel
Acrylic lens and combination meter housing
Instrument panel to front pillar garnish
Instrument panel to windshield
Instrument panel mounting pins
Wiring harnesses behind the combination met ...
Disassembly and Assembly
CAUTION:
OUTSIDE SEAT CUSHION FINISHER OUTER
Disassembly
Apply protective tape (A) to prevent damage.
Disengage fixing clip(s) and pawls using a remover tool (A), and then remove outside seat cushion finisher outer.
With 4way power seat system
: Clip : Pawl
With 8way power seat system
: C ...
NVH Troubleshooting Chart
Possible cause and suspected parts SYMPTOM Reference Noise Shake Vibration Shimmy Judder Poor quality ride or handling Improper installation, looseness × × × × × × FRONT SHOCK ABSORBER: Exploded View
FRONT STABILIZER: Exploded View
LOWER LINK: Exploded View
UPPER LINK: Exploded ...