Work ProcedureDisposal
CAUTION:
When performing disposal operation, wear the protective glasses and protective gloves.
Fix hood stay using a vise (C).
CAUTION:
When cutting a hole on hood stay, always cover a hacksaw (A) using a shop cloth (B) to avoid scattering metal fragments or oil.
Using hacksaw slowly make 2 hole ...
Inspection
WARNING:
MOUNTING INSPECTION
Check the mounting conditions (looseness, back lash) of each component and component conditions (wear, damage) are normal.
WHEEL BEARING INSPECTION
Move wheel hub and bearing assembly in the axial direction by hand. Check there is no looseness of wheel hub and bearing as ...
Diagnosis Procedure
CHECK SELF-DIAGNOSTIC RESULTS
With CONSULT
Perform self-diagnosis for “DIFFERENTIAL LOCK”.
Is any DTC detected by self-diagnosis?
YES>>
Check the malfunctioning system. Refer to DTC Index.
NO>>
GO TO 2.
CHECK DIFFERENTIAL LOCK MODE SWITCH OPERATION
Check differential lock mode swit ...