Description
The differential lock indicator lamp will flash once every 2 seconds when the differential lock system is in standby condition. Standby condition is the time between when the differential lock mode switch is turned ON and when the differential lock control unit sees all conditions are met to engage the differential lock. The differential lock indicator lamp should be OFF if there has been a malfunction detected. For more information regarding the differential lock system operation, refer to the Owners Manual.
Diagnosis Procedure
CHECK SELF-DIAGNOSTIC RESULTS
With CONSULT
Perform self-diagnosis for “DIFFERENTIAL LOCK”.
Is any malfunction detected by self-diagnosis?
YES>>Check the malfunctioning system. Refer to DTC Index.
NO>>GO TO 2.
CHECK DIFFERENTIAL LOCK MODE SWITCH
Perform trouble diagnosis for differential lock mode switch circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>Condition is intermittent. Refer to Intermittent Incident.
NO >>Repair or replace the error-detected parts.
Other materials
Basic information
WARNING
Riding in the cargo area of a Nissan Armada is extremely hazardous. In
the event of a collision, occupants in these areas face a significantly higher
risk of severe injury or fatal consequences.
Never allow passengers to occupy any part of the Nissan Armada that is
not specifi ...
Calibration of G Sensor
Description
CAUTION:
Always perform the decel G sensor calibration and side G sensor calibration before driving when the following operation is performed. Refer to Work Procedure.×: Required —: Not required Procedure
Decel G sensor calibration
Side G sensor calibration
Removing/ installi ...
Back Door Finisher
Exploded View
Back door panel
Back door finisher upper
Back door finisher
Back door opener switch
: Clip
: Pawl
Removal and Installation
REMOVALCAUTION:
Never damage the back door panel.Remove back door trim. Refer to Removal and Installation.
Disc ...