DISASSEMBLY
Remove front wiper drive assembly. Refer to Removal and Installation.
Remove front wiper linkage from front wiper motor assembly and front wiper pivot assembly.
ASSEMBLY
Note the following item, and then assemble in the reverse order of disassembly.
CAUTION:
Before assembly, apply body grease to joint parts of front wiper linkage, front wiper pivot assembly, and front wiper motor assembly. For the grease point, refer to Exploded View.
Removal and Installation
Rear WiperDiagnosis Procedure
Possible cause Inspection item Reference page ProPILOT Assist switch cannot be turned ON Symptom diagnosis: Refer to "ProPILOT Assist 2.1 cannot be turned ON" Symptom Table Cannot set SET-SW is stuck ADAS control unit 2: Check "SET/CRUISE SW" of data monitor item Diagnosis Description Che ...
Precautions when Performing Spot Welding
(1) SELECTION OF SPOT WELDING MACHINE
Use the direct welding method whenever possible.
(When direct welding cannot be applied, use MAG plug welding.)
(2) APPLICATION OF ELECTRODE TIPS
Apply electrodes at right angles to the panel. If they are not applied properly, the current density will be low, r ...
Work Procedure
REPLACE DRIVER SEAT CONTROL UNIT
Replace driver seat control unit. Refer to Removal and Installation.
>>
GO TO 2.
Vehicle SPECIFICATION RECOGNITION
Connect battery negative terminal. Power switch ON and wait for 30 seconds or more.
NOTE:
When the driver seat control unit receives a signal f ...