Exploded View
 |
Front bumper reinforcement |  |
Distance sensor bracket |  |
Distance sensor |
 |
: N·m (kg-m, in-lb) |
Removal and Installation
WARNING:
-
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.
REMOVAL
Remove front bumper fascia. Refer to Removal and Installation.
Disconnect the harness connector from the distance sensor.
Mounting the distance sensor bracket Remove the bolts 
and remove the distance sensor bracket from the front bumper reinforcement.
Remove the distance sensor mounting nuts and remove the distance sensor.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
-
If remove the distnace sensor, perform "DISTANCE SENSOR ADJUSTMENT". Refer to Work Procedure.
-
If distance sensor is being replaced or has been disconnected, perform "ADDITIONAL SERVICE WHEN REPLACING DISTANCE SENSOR". Refer to Work Procedure. Refer to Work Procedure.
Other materials
Warning/indicator lights (red)
Brake warning light
or
In the Nissan Armada, the brake warning light is a critical safety indicator
that helps monitor the condition of the braking system. When the ignition switch
is turned to the ON position, this light should illuminate briefly for a few seconds
and then turn off, ...
Front Door Lock
Exploded View
Front door outside handle
Escutcheon cover
Escutcheon base
Rear gasket
Front door outside handle bracket
TORX bolt
Key rod
(Driver side)
TORX bolt
Front door lock assembly
Inside handle cap
Front door inside handle
Hole seal
TORX bolt
Front ...
All Switches
Description
Automatic back door open/close function does not operate using all switches.
Diagnosis Procedure
CHECK OPERATION
Fully close the back door manually.
Check auto open/close function using automatic back door switch.
Is the inspection result normal?
YES>>
Automatic back door sy ...