Wiring Diagram
Wiring DiagramWork Procedure
CAUTION:
Make sure to use CONSULT when performing stroke sensor calibration. (It cannot be performed by any means other than CONSULT.)
VEHICLE CONDITION
Stop the vehicle.
Turn the ignition switch OFF and disconnect CONSULT from data link connector.
>>
GO TO 2.
CHECK 12V BATTERY
Check the 12 ...
Disassembly and Assembly
DISASSEMBLY
Remove drain plug and gasket from rear cover and drain gear oil.
Remove filler plug and gasket from rear cover.
Remove the side oil seals. Refer to Removal and Installation.
Remove rear cover mounting bolts () and remove the rear cover .
Remove stud bolt from rear cover.
NOTE:
It i ...
Removal and Installation
WARNING:
REMOVAL
Ignition switch OFF.
CAUTION:
Wait for 60 seconds after the ignition switch OFF.
Disconnect negative battery terminal. Refer to Removal and Installation.
Disconnect the transfer range position sensor connector.
Remove the transfer range position sensor.
INSTALLATION
Note the follow ...