Exploded View
 |
Select switch unit |  |
Drive mode select switch |
Removal and Installation
Remove select switch unit. Refer to VDC OFF SWITCH : Removal & Installation.
Unhook the pawls (
) to remove the drive mode select switch from the select switch unit .
INSTALLATION
Install in the reverse order of removal.
Other materials
Action Test
Work Procedure
After the front camera unit or distance sensor are replaced or a problem with ProPILOT Assist is corrected, perform a test of ProPILOT Assist 1.1 operation and check that ProPILOT Assist 1.1 operates correctly.CAUTION:
Always drive safely when performing the action test.CHECK FOR ProP ...
Additional Service When Replacing Distance Sensor
Work Procedure
Always perform the distance sensor configuration after replacing the distance sensor.
Always perform the radar alignment after removing and installing or replacing the distance sensor.
CAUTION:
The system does not operate normally unless the distance sensor configuration and the r ...
Engine Coolant
Inspection
LEVEL
Check if the reservoir tank engine coolant level is within the “MIN” to “MAX” when the engine is cool.
: MAX
: MIN
Adjust the engine coolant level if necessary.
WARNING:
Never remove reservoir tank cap when engine is hot.
CAUTION:
Refill Genuine NISSAN Long Lif ...