Diagnosis Procedure
CHECK POWER WINDOW MAIN SWITCH POWER SUPPLY AND GROUND CIRCUIT
Check power window main switch power supply and ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning parts.
CHECK FRONT POWER WINDOW MOTOR (DRIVER SIDE) POWER SUPPLY AND GROUND CIRCUIT
Check front power window motor (driver side) power supply and ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace the malfunctioning parts.
CHECK LIN COMMUNICATION CIRCUIT
Check LIN communication circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 4.
NO>>Repair or replace the malfunctioning parts.
CHECK POWER WINDOW MAIN SWITCH CIRCUIT
Check power window main switch circuit. Refer to Component Function Check.
Is the inspection result normal?
YES>>GO TO 5.
NO>>Repair or replace the malfunctioning parts.
REPLACE POWER WINDOW MAIN SWITCH CIRCUIT
-
Replace power window main switch. Refer to Removal and Installation.
-
Confirm the operation again.
Is the inspection result normal?
YES>>INSPECTION END
NO>>Replace front power window motor (driver side). Refer to Disassembly and Assembly.
Other materials
I-BSI system limitations
WARNING
The following limitations apply to the Nissan Armada Intelligent Blind Spot
Intervention (I-BSI) system. Failure to operate the vehicle within these limitations
may result in serious injury or death.
The Nissan Armada I-BSI system cannot detect all vehicles or objects
in every si ...
Diagnosis and Repair Work Flow
Work Flow
DETAILED FLOWINTERVIEW FROM THE CUSTOMER
CAUTION:
Customers are not professional. Never guess easily like “maybe the customer means that...,� or “ maybe the customer mentions this symptom�.
>>
GO TO 2.
CHECK SYMPTOM
Reproduce the symptom that is indicated by the customer, ...
Front Seat Cushion Finisher
Disassembly and Assembly
CAUTION:
When disassemble, always use a remover tool that is made of plastic to prevent damage.OUTSIDE SEAT CUSHION FINISHER OUTERDisassemblyApply protective tape (A) to prevent damage.
Disengage fixing clip(s) and pawls using a remover tool (A), and then remove outside se ...