Description
Driver door does not lock/unlock using door lock and unlock switch.
Diagnosis Procedure
CHECK DOOR LOCK ACTUATOR
Check door lock actuator (driver side).
Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning parts.
REPLACE BCM
-
Replace BCM. Refer to Removal and Installation.
-
Confirm the operation after replacement.
Is the result normal?
YES>>INSPECTION END
NO>>Check intermittent incident. Refer to Intermittent Incident.
Other materials
Automatic Back Door Switch Finisher
Removal and Installation
CAUTION:
Never damage the back door panel.REMOVALCAUTION:
When removing, always use a remover tool that is made of plastic to prevent damage to the parts.Fully open back door.
Apply protective tape (A) on back door lower finisher to protect it from damage.
Disengage automa ...
Glass Lid Guide
Exploded View
Refer to Exploded View.
Removal and Installation
REMOVALRemove drain assembly. Refer to Removal and Installation.
Remove sunshade. Refer to Removal and Installation.
Remove side trim and glass lid guide from moonroof frame assembly.
Remove side trim from glass lid guide.INSTALLATIO ...
Ambient Sensor
Removal and Installation
REMOVALRemove front grille. Refer to Removal and Installation.
Disengage fixing pawl.
: Pawl
Disconnect harness connector to remove ambient sensor .INSTALLATIONInstall in the reverse order of removal. ...