Removal and Installation
REMOVAL
CAUTION:
-
Before replacing driving video recorder control module, perform “ADDITIONAL SERVICE WHEN REPLACING DRIVING VIDEO RECORDER CONTROL MODULE”. For details, refer to Work Procedure.
-
Before replacing the driving video recorder control module, the customer should be informed if the files in the driving video recorder control module need to be backed up.
Remove the Front center console cover. Refer to Removal and Installation.
Disconnect connectors 
from driving video recorder control module 
.
Remove the mounting screws , and remove driving video recorder control module .
INSTALLATION
Note the following, and install in the reverse order of removal.
CAUTION:
After installation, perform “ADDITIONAL SERVICE WHEN REPLACING DRIVING VIDEO RECORDER CONTROL MODULE”. For details, refer to Work Procedure.
Other materials
Front Height Sensor
Exploded View
Front height sensor
:vehicle front
:N·m (kg-m, ft-lb)
:N·m (kg-m, in-lb)
Removal and Installation
REMOVALWARNING:
When removing the air suspension component parts, always follow the removing procedure since the vehicle heig ...
The Braking Force of Parking Brake Is High
Description
The parking brake braking force is too high.
Diagnosis Procedure
PERFORM THE SELF-DIAGNOSIS
With CONSULT
Perform self-diagnosis for “ABS”.
Is any DTC detected?
YES>>
Check the DTC. Refer to DTC Index.
NO>>
GO TO 2.
CHECK REAR DISC BRAKE SYSTEM (1)
Check if the rear disc ...
Sunload Sensor
Exploded View
Sunload sensor
Front speaker grille
: Pawl
: vehicle front
Removal and Installation
REMOVALRemove front speaker grille. Refer to Removal and Installation.
Disengage fixing pawls, and then push down sunload sensor and remove it.
: Pawl
INSTALLATIONIn ...