Exploded View
Refer to Exploded View.
Removal and Installation
REMOVAL
Drain engine coolant from cooling system. Refer to ENGINE COOLANT : Draining.
Disconnect electric water pump harness connector
.

Disengage fixing clip, and then move electric water pump harness to secure work space.

![]() |
: Clip |
Loosen clamps
, and then disconnect water hose 3
and water hose 4
from electric water pump.

Remove mounting bolts
, and then remove electric water pump assembly.

Disengage fixing clips
, and then remove bracket from electric water pump.

INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
Securely insert each hose, and install clamp at a position where it does not interfere with the pipe bulge.
NOTE:
When filling radiator with engine coolant. Refer to ENGINE COOLANT : Refilling.
Other materials
Precautions
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG� and “SEAT BELT PRE-TENSIONER�, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger fo ...
Door Outside Molding
Exploded View
Front door panel
Front door outside molding
Rear door outside molding
Rear door panel
: Pawl
: vehicle front
Front Door Outside Molding
Removal and Installation
REMOVALCAUTION:
Never damage the front door panel.Fully open front door gl ...
Additional Service When Replacing Around View Monitor Control Unit
Description
CAUTION:
When replacing the around view monitor control unit, always replace it with a new one. Around view monitor system does not operate properly in case of reuse of the around view monitor control unit from another vehicle.
When before writing the around view monitor control unit ...
