Wiring Diagram
Wiring DiagramRear Floor Front
WARNING:
Work after rear fender, outer rear sill reinforcement, outer rear wheelhouse, and inner rear wheelhouse are removed.
Remove the welding point for easier installation.
: Vehicle front : Drill φ6 mm (0.24 in) hole for the plug welding hole (ultra high strength steel). : Weld the parts onto ...
Removal and Installation
CAUTION:
Never excessively pull body side welt.
Never damage the body panel.
REMOVAL
Front Body Side Welt
Pull the mounting part inside the vehicle to the outside of the vehicle, and then remove front body side welt.
CAUTION:
Remove the headlining portion of front body side welt slowly and carefu ...
Diagnosis Procedure
Without ProPILOT Assist 2.1
CHECK THE WINDSHIELD
Check if the windshield is dirty, frosted, fogged up, or damaged in front of the front camera unit.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Clear, clean, or repair the windshield as needed. Refer to Removal and Installation. ...