ENGINE COOLANT : InspectionRemoval and Installation
REMOVAL
Remove front seat LH. Refer to Removal and Installation.
Remove front kicking plate inner LH and rear kicking plate inner LH. Refer to Removal and Installation.
Remove dash side finisher LH. Refer to Removal and Installation.
Remove center pillar lower garnish LH. Refer to Removal and Instal ...
Diagnosis Procedure
CHECK POWER WINDOW MAIN SWITCH POWER SUPPLY AND GROUND CIRCUIT
Check power window main switch power supply and ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning parts.
CHECK FRONT POWER WINDOW MOTOR ( ...
Removal and Installation
REMOVAL
WARNING:
CAUTION:
Never disassemble the rear height sensor.
Start engine.
Turn OFF the electronic air suspension function. Refer to Operation.
Stop engine.
Lift up the vehicle.
Disconnect rear height sensor harness connector.
Remove rear height sensor.
INSTALLATION
Note the following, and ...