Exploded View
 |
Exhaust gas/outside odor detecting sensor |  |
Active grille shutter | ||
 |
: Clip | ||||
 |
: Pawl | ||||
| : vehicle front | |||||
Removal and Installation
REMOVAL
Remove front grille upper. Refer to the following.
-
Off road models: Removal and Installation
-
City models: Removal and Installation
Disconnect exhaust gas/outside odor detecting sensor harness connector 
.
Disengage fixing clip, and then remove exhaust gas/outside odor detecting sensor harness connector.
|
: Clip |
Disengage fixing pawl and turn the exhaust gas/outside odor detecting sensor according to numerical order 1→2 indicated by arrow as shown in the figure and remove it.
|
: Pawl |
INSTALLATION
Install in the reverse order of removal.
Other materials
Corrosion protection
Most common factors contributing to vehicle corrosion
The buildup of moisture-retaining dirt, debris, and contaminants in body
panel seams, cavities, and hidden sections of the Nissan Armada can significantly
accelerate corrosion over time.
Damage to the paint finish or protective coa ...
Engine Coolant
Service Data
ENGINE COOLANT CAPACITY (APPROXIMATELY)Unit: ℓ (US qt, Imp qt) Engine coolant capacity [With reservoir tank (“MAX” level)]
13.0 (13-6/8,11-4/8)
Reservoir tank engine coolant capacity (At “MAX” level)
1.61 (1-6/8,1-3/8)
...
Radiator
Inspection
Check radiator for mud or clogging. If necessary, clean radiator as per the following:
Be careful not to bend or damage radiator fins.
When radiator is cleaned without removal, remove all surrounding parts such as radiator cooling fan assembly and horns. Then tape harness and connector ...