NIARMADA Nissan Armada manuals & owner information
Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada owner manuals, service procedures, maintenance references, technical information and practical guides for different Armada generations.

Browse manuals →
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: Radiator

Nissan Armada 2025-2026 Service and Repair Manual / Maintenance. Maintenance Procedures / Engine Maintenance / Radiator

Inspection

Check radiator for mud or clogging. If necessary, clean radiator as per the following:

  • Be careful not to bend or damage radiator fins.

  • When radiator is cleaned without removal, remove all surrounding parts such as radiator cooling fan assembly and horns. Then tape harness and connectors to prevent water from entering.

Apply water by hose to the back side of the radiator core vertically downward.

Apply water again to all radiator core surfaces once per minute.

Stop washing if any stains no longer flow out from radiator.

Blow air into the back side of radiator core vertically downward.

  • Use compressed air lower than 490 kPa (5 kg/cm2, 71 psi) and keep distance more than 30 cm (11.8 in).

Blow air again into all the radiator core surfaces once per minute until no water sprays out.

    Other materials

    LDW system operation
    The Nissan Armada LDW and I-LI systems utilize a forward-facing camera mounted behind the windshield to continuously monitor lane markings and road boundaries. Example I-LI ON indicator (displayed in the vehicle information screen) LDW/I-LI alert indicator (vehicle information displ ...

    Dash Side Finisher
    Removal and Installation CAUTION: Never damage the body panel.REMOVALRemove front kicking plate. Refer to Removal and Installation. Remove hood lock control handle (driver side). Refer to Removal and Installation. Disengage dash trim clip from dash side finisher. Disengage dash side finisher fixi ...

    Third Seat Rh Position Initialization
    Description Perform the third seat RH position initialization when the following conditions are performed. For details, refer to Work Procedure. Replacing third seat control unit RH. Replacing third seat RH. Manual function and folding function of third seat RH does not operate normally. Work Proce ...