
![]() | A/T assembly | ![]() | A/T fluid warmer | ![]() | O-ring |
![]() | : N·m (kg-m, in-lb) | ||||
![]() | : Always replace after every disassembly. | ||||
![]() | : Apply ATF | ||||
A/t Fluid Warmer
Removal and InstallationDiagnosis Procedure
COMBINATION SWITCH INSPECTION
Check combination switch. Refer to Symptom Table.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning part.
CHECK FRONT FOG LIGHT REQUEST SIGNAL
With CONSULT
Select “Front fog lamp request” in “Data Monitor” mo ...
Removal and Installation
WARNING:
CAUTION:
Front bumper fascia assembly is made of resin. Never apply excessive force to it, and be careful to prevent contact with oil.
REMOVAL
Remove front grille. Refer to Removal and Installation.
Remove front bumper energy absorber A.
Disengage active grille shutter fixing clips .
Di ...
Precautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...