
![]() | Rear final drive assembly | ![]() | Differential lock position switch | ||
![]() | O-ring | ||||
: N·m (kg-m, in-lb) | |||||
: Apply gear oil. | |||||
Removal and InstallationCorrosion Protection
To provide improved corrosion prevention, the following anti-corrosive measures have been implemented in NISSAN production plants. When repairing or replacing body panels, it is necessary to use the same anti-corrosive measures.
ANTI-CORROSIVE PRECOATED STEEL (GALVANNEALED STEEL)
To improve repairab ...
Inspection of Welded Portion
Spot welded portions can be checked by the destructive inspections explained below. They can be easily adopted when welding. Before and after welding, you should perform these destructive inspections to check the strength of the welded portions.
The welding spots should be equally spaced and arrange ...
Unit Removal & Installation
WARNING:
WARNING:
Situate the vehicle on a flat and solid surface.
Place chocks at the front and back of rear wheels.
For engines not equipped with engine slingers, attach proper slingers and bolts described in PARTS CATALOG.
CAUTION:
Always be careful to work safely, and avoid forceful or uninstru ...