Exploded View
Off Road Models
 |
Fender protector |  |
Spring nut |  |
Fender clip |
 |
Grommet | ||||
 |
N·m (kg-m, in-lb) |
City Models
|
Fender protector | |
Spring nut | |
Fender clip |
|
Grommet | ||||
|
N·m (kg-m, in-lb) |
Removal and Installation
WARNING:
REMOVAL
Remove front side spoiler (with front side spoiler). Refer to Removal and Installation.
Remove side step. Refer to Removal and Installation.
Remove fender protector mounting bolts and fixing screws and clips.
Remove fender clips, and then remove fender protector.
Remove spring nuts from fender protector.
INSTALLATION
Install in the reverse order of removal.
Other materials
Intelligent Cruise Control (ICC)
Basic information
The Intelligent Cruise Control (ICC) system in the Nissan Armada is an integral
component of the advanced ProPILOT Assist suite. Before using this feature, it is
strongly recommended to carefully review the entire ProPILOT Assist section to fully
understand system operation, ...
Rear Axle Tools and Preparation
Special Service Tools
Tool number
(TechMate No.)
Tool name Description
KV40104001
(NI-53385)
Hub lock nut wrench
a: 85 mm (3.35 in)
b: 65 mm (2.56 in)
Removing and Installing wheel hub lock nut.
KV40107300
(NI-51751)
Boot band crimping tool
Installing boot band
KV38108000
( - )
...
Steering Assist Switch
Removal & Installation
REMOVALRemove instrument pad A. Refer to Removal and Installation.
Remove mounting screws , and remove switch panel from instrument pad A .
Unhook the pawls to remove the switch from the switch panel .　
INSTALLATIONInstallation is in the reverse order of removal. ...