Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada manuals, operating instructions, maintenance references and technical information.

Browse manuals
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: Front Grille

Off Road Models

Exploded View

Front bumper fascia Grommet Front grille upper
Front grille Front emblem Front camera
: Clip
: Pawl
: Indicate that the part is connected at points with same symbol in actual vehicle.

Removal and Installation

REMOVAL

Fully open hood assembly.

Remove fixing clips .

Remove fixing clips .

Disengage front grille fixing clips to secure workspace, and then remove front grille upper .

: Clip

Disengage fixing clips and pawls, and then remove front grille.

: Clip
: Pawl

Remove the following parts after removing front grille.

  • Front camera. Refer to Removal and Installation.

  • Front emblem

  • Grommets

INSTALLATION

Note the following items, and then install in the reverse order of removal.

CAUTION:

  • Perform front camera image calibration. Refer to Work Procedure.

  • When installing front grille, check that pawls and clips are securely fitted in holes, and then press them in.

City Models

Exploded View

Front bumper fascia Grommet Front grille upper
Front grille Front emblem Front camera
: Clip
: Pawl
: Indicate that the part is connected at points with same symbol in actual vehicle.

Removal and Installation

REMOVAL

Fully open hood assembly.

Remove fixing clips .

Remove fixing clips .

Disengage front grille fixing clips to secure workspace, and then remove front grille upper .

: Clip

Disengage fixing clips and pawls, and then remove front grille.

: Clip
: Pawl

Remove the following parts after removing front grille.

  • Front camera. Refer to Removal and Installation.

  • Front emblem

  • Grommets

INSTALLATION

Note the following items, and then install in the reverse order of removal.

CAUTION:

  • Perform front camera image calibration. Refer to Work Procedure.

  • When installing front grille, check that pawls and clips are securely fitted in holes, and then press them in.

    Other materials

    Calibration of Decel G Sensor
    Description TCM stores calibration data (inherent characteristic value) of decel G sensor to provide accurate control.Decel G sensor calibration must be performed when the following operation is performed. For work procedure, refer to Work Procedure. Removing/Installing yaw rate/side/decel G sensor ...

    Additional Service When Replacing Steering Column Control Module
    Description Each function is reset to the following condition when the steering column control module is replaced. For details, refer to Work Procedure. Function Condition Procedure Memory (Steering column) Erased Perform memory storing Work Procedure REPLACE STEERING COLUMN CONTROL MODUL ...

    Brake Fluid
    Inspection WARNING: Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System. BRAKE FLUID LEVEL C ...