Removal and Installation
REMOVAL
Remove front door finisher. Refer to Removal and Installation.
Remove front door inside handle fixing screws 
.
Remove front door inside handle fixing pawls, and then remove front door inside handle.
 |
：Pawl |
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
-
When connecting front door inside handle cable to front door inside handle, check that front door inside handle cable is properly engaged with front door inside handle.
-
After installation, check front door lock. Refer to Inspection.
Other materials
Aeb Off Warning Lamp Is Blinking
Symptom Description
Without ProPILOT Assist 2.1The AEB OFF warning lamp is blinking. Refer to Diagnosis Procedure.NOTE:
When any of the following conditions, the AEB OFF warning lamp blinks:
The distance sensor area of the front of the vehicle is covered with dirt or is obstructed
The interior t ...
Indicator Unit
Exploded View
Cover
Indicator unit
Removal and Installation
REMOVALRemove cover. Refer to Removal and Installation.
Remove indicator unit fixing screws , and then remove indicator unit.
INSTALLATIONInstall in the reverse order of removal. ...
Diagnosis and Repair Workflow
Nissanconnect
Work Flow
OVERALL SEQUENCEDETAILED FLOWINTERVIEW FOR MALFUNCTION
It is also important to clarify the customer concerns before starting the inspection. Interview the customer about the concerns carefully and understand the symptoms fully.
NOTE:
The customers are not professionals. Neve ...