Removal and Installation
REMOVAL
Remove front door finisher. Refer to Removal and Installation.
Remove front door module assembly. Refer to Removal and Installation.
Remove front door outside handle bracket. Refer to Removal and Installation.
Remove front door lock assembly mounting TORX bolts.
Disengage front door lock assembly fixing pawls, and then remove front door lock assembly.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
-
Never reuse front door lock assembly mounting TORX bolt. Always replace it with a new one when it is removed.
-
When installing, tighten mounting TORX bolts according to numerical order 1→3 as shown in figure.

-
When installing, be careful that cable is routed normally.
-
When connecting front door inside handle cable to front door inside handle, check that front door inside handle cable is properly engaged with front door inside handle.
-
When connecting front door lock knob cable to front door finisher, check that front door lock knob cable is properly engaged with front door finisher.
-
After installation, check front door lock. Refer to Inspection.
Inspection
After opening and closing the door, check that door is fixed to the vehicle body normally.
Check the lock/unlock operation of door lock.
Other materials
Rear Power Window Switch
Removal and Installation
CAUTION:
Never bend the fixing pawl of rear armrest.REMOVALRemove rear door finisher. Refer to Removal and Installation.
Disconnect rear power window switch harness connector.
Remove rear armrest fixing screws , and then remove rear armrest from rear door finisher .
: Pa ...
Front Door Woofer
Removal & Installation
REMOVALRemove the front door finisher. Refer to Removal and Installation.
Disconnect front door woofer harness connector.
Remove the front door woofer mounting screws , and then remove the front door woofer .
INSTALLATIONInstallation is the reverse order of removal. ...
Roof Antenna
Exploded View
Roof antenna
: N·m (kg-m, in-lb)
Removal and Installation
REMOVALRemove the headlining assembly. Refer to Removal and Installation.
Disconnect the antenna feeder connector.
Remove the mounting nut.
Remove the roof antenna from the vehicle.INSTALLATIONNote the following, ...