Removal and Installation
REMOVAL
CAUTION:
Never damage the rear door panel.
Fully open rear door glass.
Apply protective tapes (A) on the part to protect it from damage.
Disengage rear door outside molding fixing pawls of front and rear side using remover tool (A) and (B).
CAUTION:
Never lift rear door outside molding with excessive force to prevent damage to the part.
 |
: Pawl |
Twist rear door outside molding toward the direction of arrow in the figure, and then lift up and remove it.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
When installing rear door outside molding, it must take account of the mating surface with the rear door sash cover.
Other materials
Front Door Lock
Exploded View
Front door outside handle
Escutcheon cover
Escutcheon base
Rear gasket
Front door outside handle bracket
TORX bolt
Key rod
(Driver side)
TORX bolt
Front door lock assembly
Inside handle cap
Front door inside handle
Hole seal
TORX bolt
Front ...
Vehicle Security System Cannot Be Set
Description
Armed phase is not activated.
Diagnosis Procedure
CHECK INTELLIGENT KEY SYSTEM
Check Intelligent Key system. Refer to System Description.
Are all doors LOCKED?
YES>>
GO TO 2.
NO>>
Check Intelligent Key system. Refer to Diagnosis Procedure.
CHECK HOOD SWITCH
Check hood switc ...
Location of Plastic Parts
Precautions for Plastics
Abbreviation Material name Heat resisting temperature °C (°F)
Resistance to gasoline and
solvents Other cautions
PE
Polyethylene
60 (140)
Gasoline and most solvents are harmless if applied for a very short time (wipe out quickly).
Flammable
ABS
Acrylon ...