Replacement
Removal and InstallationNVH Troubleshooting Chart
Use chart below to find the cause of the symptom. If necessary, repair or replace these parts.
Possible cause and SUSPECTED PARTS Symptom Reference FRONT AXLE Noise Shake Vibration Shimmy Judder Poor quality ride or handling Improper installation, looseness × × × × × × Explo ...
Removal and Installation
WARNING:
REMOVAL
Remove transfer assembly from vehicle. Refer to Removal and Installation.
Remove input oil seal.
CAUTION:
Never damage the front case and input shaft.
INSTALLATION
Note the following, and install in the reverse order of removal.
Install input oil seal with a drift (A) (commercial s ...
Removal & Installation
WARNING:
REMOVAL
Remove valve timing control covers (bank 1 and bank 2) and gasket as follows:Disconnect valve timing oil control solenoid valve (bank 1 and bank 2) harness connector. Loosen valve timing control cover mounting bolts in the order from 4 to 1 as shown in the figure.
: Bank 1 : Ba ...