Removal and Installation
REMOVAL
Drain engine coolant from cooling system. Refer to ENGINE COOLANT : Draining.
Remove engine cover. Refer to Removal and Installation.
Remove air inlet tube 1. Refer to Removal & Installation.
Remove front heater outlet pipe assembly mounting nuts 
and mounting bolt 
.
| : vehicle front |
Loosen clamp 
, and then disconnect rear water hose 6 from front heater outlet pipe assembly.
Loosen clamp , and then disconnect front heater outlet pipe assembly from front heater pipe assembly.
Remove front heater outlet pipe assembly from vehicle.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
Securely insert each hose, and install clamp at a position where it does not interfere with the pipe bulge.
NOTE:
When filling radiator with engine coolant. Refer to ENGINE COOLANT : Refilling.
Other materials
Difference between predictive and actual distances
Basic information
The Nissan Armada display guide lines and their projected positions on the ground
are intended as approximate references only and should not be relied upon as exact
measurements.
Due to factors such as road incline, uneven terrain, and objects that extend
outward, the actua ...
Window washer fluid
WARNING
Washer antifreeze solutions are toxic. Always store them in labeled containers
and keep them away from children and animals.
Maintain the washer fluid level in your Nissan Armada by checking it periodically
and refilling as needed, especially when the low washer fluid warning ind ...
Diagnosis and Repair Work Flow
Work Flow
DETAILED FLOWINTERVIEW FROM THE CUSTOMER
CAUTION:
Customers are not professional. Never guess easily like “maybe the customer means that...,” or “maybe the customer mentions this symptom”.
>>
GO TO 2.
CHECK SYMPTOM
Reproduce the symptom that is indicated by the customer, b ...