Removal and Installation
REMOVAL
Remove front heater & cooling unit assembly and front blower unit assembly. Refer to Removal and Installation.
Disconnect front mode door motor harness connector 
.
Remove fixing screws , and then remove front mode door motor.
INSTALLATION
Install in the reverse order of removal.
Other materials
Symptoms and Troubleshooting
Symptom Table
The diagnostics item numbers show the sequence for inspection. Inspect in order from item 1.
Perform diagnoses of symptom table 1 before symptom table 2.
SYMPTOM TABLE 1 Diagnostic item Reference Symptom
Poor performance
Driving performance Strange noise
Shift point is hi ...
Steering Tilt
Diagnosis Procedure
CHECK STEERING TILT MECHANISM
Check for the following.
Mechanism deformation or pinched foreign materials.
Interference with other parts because of poor installation.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning par ...
Gps Antenna
Feeder Layout
GPS antenna
AV control unit
Harness connector (M323)
Harness connector (M412)
Clip with connector (M325)
: Clips
To antenna feeder (vehicle side)
Removal & Installation
REMOVALRemove the ins ...