Nissan Armada 2025-2026 Service and Repair Manual: Fuel Filler Lid

Exploded View

Fuel filler base assembly Fuel filler lid Fuel filler lid lock assembly Fuel filler base mask : Pawl : Always replace after every disassembly. ...

Removal and Installation

REMOVAL Fully open fuel filler base assembly. Disengage fuel filler lid fixing pawl using a removal tool (A), and then remove fuel filler lid according to numerical order 1→2 indicated by arrows ...

Other materials:

Precautions For Harness Repair
CAN communication uses a twisted pair line. Be careful when repairing it. Solder the repaired area and wrap tape around the soldered area. NOTE: A fray of twisted lines must be within 110 mm (4.33 in). Bypass connection is never allowed at the repaired area. NOTE: ...

Removal and Installation
REMOVAL Remove front heater & cooling unit assembly. Refer to Removal and Installation. Disconnect front air mix door motor (passenger side) harness connector . Remove sub harness from front case lower assembly. Remove cooler packing. Remove fixing screws , and then remove heater pipe suppor ...

Inspection
INSPECTION AFTER REMOVAL Timing Chain Check for cracks and any excessive wear at link plates and roller links of timing chain. Replace timing chain if necessary. : Crack : Wear INSPECTION AFTER INSTALLATION Inspection for Leakage The following are procedures for checking fluids leakage, lubricat ...