Removal and Installation
REMOVAL
Remove fuel filler base assembly. Refer to Removal and Installation.
Rotate and disengage fuel filler lid lock assembly 
fixing pawls according to the numerical order 1→2 indicated by arrows as shown in the figure, and then remove fuel filler lid lock assembly.
 |
: Pawl |
| : vehicle front |
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
After installation, check fuel filler lid base assembly open/close operation.
Other materials
Cockpit
Example
The cockpit of the Nissan Armada is thoughtfully designed to provide intuitive
control, comfort, and accessibility for the driver. Every switch, button, and control
element is positioned to enhance driving convenience and ensure that essential functions
are always within easy reac ...
When Both Power Window Main Switch and Rear Power Window Switch Lh Are Operated
Diagnosis Procedure
CHECK REAR POWER WINDOW MOTOR LH POWER SUPPLY AND GROUND CIRCUIT
Check rear power window motor LH power supply and ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning parts.
CHECK ...
Cumulative Battery Discharge Current Clear
Description
CUMULATIVE BATTERY DISCHARGE CURRENT CLEAR is an operation to clear the cumulative value of battery discharge current which is memorized in IPDM E/R. This operation is necessary after replaced the 12V battery. Refer to Work Procedure.NOTE:
The cumulative battery discharge current value i ...