| Applied model | Axle | 4WD |
|---|---|---|
| Engine | VR35DDTT | |
| Transmission | A/T | |
| Transfer model | ATX93C | |
| Gear ratio | 4H | 1.000 |
| 4L | 2.717 | |
| Fluid capacity | Refer to Fluids and Lubricants. | |
Adjustment
FITTING ADJUSTMENT
Fitting Adjustment Standard Dimension
Hood assembly Front grille Front combination lamp Front fender assembly Hood hinge Hood bumper rubber 1 Hood lock assembly : N·m (kg-m, ft-lb) : Body grease
Unit: mm [in]
Portion Standard ToleranceDifference
(RH/LH, MAX) Hood as ...
Removal and Installation
CAUTION:
Never damage the body panel.
REMOVAL
Remove front kicking plate. Refer to Removal and Installation.
Remove hood lock control handle (driver side). Refer to Removal and Installation.
Disengage dash trim clip from dash side finisher.
Disengage dash side finisher fixing clips, and then remo ...
Work Procedure
START
Ignition switch ON.
Check information display of the combination meter.
Is Distance to Engine Oil Change displayed?
YES>>
GO TO 3.
NO>>
GO TO 2.
SELECT OIL CONTROL SYSTEM MODE
Push the Display next switch and select oil control system mode.
>>
GO TO 3.
RESET ENGINE OIL D ...