Nissan Armada 2025-2026 Service and Repair Manual: Work Procedure
START
Ignition switch ON.
Check information display of the combination meter.
Is Distance to Engine Oil Change displayed?
YES>>GO TO 3.
NO>>GO TO 2.
SELECT OIL CONTROL SYSTEM MODE
Push the Display next switch and select oil control system mode.
>>GO TO 3.
RESET ENGINE OIL DATA
Press and hold the Display Next switch at least 1 second while Distance to Engine Oil Change is displayed.
Stop pressing the Display Next switch, and a few seconds later, check that the value of Distance to Engine Oil Change is reset.
END
Engine Oil Data Reset
The oil control system allows calculating the remaining distance to drive before oil change request. The engine oil data reset must be performed after engine oil is changed. (For details, refer to Wor ...
Other materials:
Exploded View
Parting seal A Parting seal B Parting seal C Double-sided tape
[t: 0.8 mm (0.031 in)] Double-sided tape
[t: 2.5 mm (0.098 in)] : Clip : Vehicle front : Always replace after every disassembly. ...
Diagnostic Work Sheet
DESCRIPTION
INTERVIEW SHEET SAMPLE
Interview sheet Customer name MR/MS Registration number Initial year registration Vehicle type VIN Storage date Engine Mileage km ( Mile) Situation where malfunction is occurred Malfunction category â–¡ Unable to brake    □ Unable to releaseâ ...
PRECAUTIONS FOR REMOVING BATTERY TERMINAL : Precautions
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
0.0054