Exploded View
 |
Glove box assembly |  |
Sleeve |  |
Glove box lid lock cylinder |
Removal and Installation
REMOVAL
NOTE:
Glove box lid lock key cylinder is integrated with glove box assembly. So, glove box lid lock key cylinder cannot be removed from glove box assembly and it cannot be replaced without glove box assembly.
Remove glove box lid assembly. Refer to Removal and Installation.
INSTALLATION
CAUTION:
Never pull out glove box lid lock cylinder from sleeve . Otherwise, tumbler 
pops out glove box lid lock key cylinder.
-
Align groove
of sleeve with projection 
of insert hole of glove box latch handle 
of glove box assembly.
-
Push to install glove box lid lock key cylinder
for glove box latch handle of glove box assembly until locked tumble stopper .
-
Install glove box assembly. Refer to Removal and Installation.
CAUTION:
After installation, check glove box assembly open/close, lock/unlock operation.
Other materials
Vehicle Jerks During
Diagnosis Procedure
The vehicle jerks when VDC function, TCS function, ABS function, EBD function, brake limited slip differential (BLSD) function, brake assist function, hill start assist function, advanced hill descent control function or trailer sway control function operates.CHECK SYMPTOM
Check ...
Front Washer Nozzle and Tube
Exploded View
Front washer nozzle LH
Front washer nozzle tube LH
Front washer nozzle RH
Front washer nozzle tube RH
Check valve
Front washer tube C
Connector
Front washer tube B
Front washer tube A
Washer tank assembly
: Pawl
Hydraul ...
Charging System Tools and Preparation
Special Service Tools
Tool number
(TechMate No.)
Tool name Description
—
(—) Model GR8-1200 NI
Multitasking battery and electrical diagnostic station
Tests batteries, starting and charging systems and charges batteries.
For operating instructions, refer to diagnostic station instruction ...