Diagnosis Procedure
CHECK HEAD UP DISPLAY POSITION ADJUSTMENT SIGNAL
With CONSULT
-
Select "Data Monitor" mode of "Head Up Display� using CONSULT.
-
Check "Display up and down status" and "Display rotation status" indication as per the following condition.
Monitor item Condition Indication Display up and down status Press each position adjustment on the combination meter setting screen. The display changes to (-10) - (10) Display rotation status The display changes to (-10) - (10) Refer to Switch Name and Function.
Is the inspection result normal?
YES>>Replace Head Up Display unit. Refer to Removal and Installation.
NO>>Check Combination meter self diagnosis result. Refer to DTC Index.
Other materials
I-BSI driving situations
Indicator on
Indicator off
Indicator flashing
Illustration 1 - Approaching from behind
Another vehicle approaching from behind
Illustration 1: In the Nissan Armada, the side indicator light will illuminate
when a vehicle enters the detection zone from the rear in an adjacent lane, h ...
Precautions
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG� and “SEAT BELT PRE-TENSIONER�, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger fo ...
Front Suspension Assembly
Inspection
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.
COMPONENT PARTCheck ...